Submit your diamond tool engineering report for a better performing tool.

-- NOTICE --

GIDCO has been acquired by 3M

GIDCO
140 Algonquin Parkway
Whippany, NJ 07981 USA

973 884 2500

973 884 0392

info@gidco.com

Tools Engineering Report Form

Submit, fax, or e-mail a completed copy of this report to our engineering department which will promptly provide you with the best specification and a price quotation.


First Name	Last Name

Company Name

Address



City	State	Zip	Country

Telephone	Fax

Email Address

1. Specify the Diamond Weight Required

2. Specify the Diamond Quality Blue Dot - Extra Select Grade White Dot - Standard Find Grade Green Dot - Commercial Grade Red Dot - General Purpose Grade Throwaway - Single Use Grade Pisces - Single Use Grade VLP - Single Use Grade

3. Specify Special Shape or Type of Diamond (chisel point, conical point, etc.)

4. Give a Full Description of the Diamond Tool Shank a. For tools with a single diameter, specify both diameter and total length. b. For tools with an enlarged or reduced head, specify the diameters and lengths of both the head and tail sections. c. Specify any milled flats, special steel "nose" angles, threaded areas, tapped holes, etc.. Blueprints are usually preferred for such tools. The make and model of machine frequently is all we need.

5. If the tool is to be used to form convex (male) radii on a grinding wheel, as opposed to simply a straight dress, please tell us. Radius dressing requires us to perform an additional machining operation to locate the diamond point concentrically with the tool diameter, so that a properly formed wheel radius results.

For Standard Single Point Tools

Check if Forming Male Radii, Point Centrality Needed

Note: All shaped and formed tools including cones are automatically on center.


	How To Order